Pontiac
-
Subframe Connector Kits
$229.00Our subframe connector kits are precision formed to ensure excellent fit with the undercarriage of your car and are compatable with stock exhaust/fuel line/brake line pathing.All install hardware (grade 8) is included; these can be welded as well! Connectors are provided with tough black powdercoated finish. Instructions included. Solid body bushings are recommended for first and second gen applications. Our bushing kits are listed in this category. Learn More
-
A01-077 67-81 CAMARO/FIREBIRD TIE-ROD SLEEVES
$69.00PAIR, SUPER DUTY TIE-ROD SLEEVES AND NUTS. RIGID AND SEAMLESS TIE-ROD SLEEVES. NOT ONLY INCREASE RELIABILITY OVER STAMPED OEM STYLE SLEEVES BUT ADDS A SMOOTH/CLEAN LOOK TO WHAT USUALLY APPREARS ROUGH. Learn More -
A01-840 STRONG-ARM F-BODY (FIREBIRD, CAMARO) 1.25" FRONT STABILIZER BAR KIT
$239.00NEW! 1.25" diameter front stabilizer bar for all second gen (70-81) Firebird, TAs and Camaros. Stronger bar than stock and comes complete with polyurethane mounting bushings and polyurethane/grade 8 link kits. Stabilizer bar finish is low gloss black powdercoat. Learn More -
A01-839 STRONG-ARM A-BODY (GTO, 442, CHEVELLE, GS) 1.25" FR STABILIZER BAR KIT
$239.00NEW! 1.25" diameter front stabilizer bar for all GM A-body vehicles, 1964-1972. Stronger bar than stock and comes complete with polyurethane mounting bushings and polyurethane/grade 8 link kits. Stabilizer bar finish is low gloss black powdercoat. Learn More -
AU-01 SPHERICAL BEARING UPGRADE
$100.00Spherical upgrade to any of our front A-arms or Rear control arms. Our spherical bearings eliminates bearing bind or deflection and the premature wear that comes from bind/deflection. Price is per pair. For A-arms 2 pair are needed. For rear control arms usually only fwd location should be upgraded to spherical bearing. Learn More -
A-014 64-72 GTO/CHEVELLE/442/GS TUBULAR FRONT SUSPENSION
$995.00High strength tubular front control arms for 64-72 GM a-body with standard spring style. Made from DOM tubing with strength reinforcements on lowers. Lower arms configured with caster improvement to increase stability and road-feel. Billet cross-shafts provide stock or additional camber gain. Includes ball joints, EnergySuspension poly bushings and heim-joint sway bar links. Black powdercoated and fully assembled.To upgrade to spherical bearings in place of the lower bushings order AU-01, quantity 2. Learn More
-
AWP-2 8 BOLT HIGH FLOW WATER PUMP
$129.00FOR 1963-1968 8 BOLT WATER PUMP WITH INGENIOUS IMPELLER WHICH IS THE MOST EFFICIENT AVAILABLE. THIS DESIGN ELIMINATES "CAVITATION" WHICH ENSURES EFFECTIVE COOLANT MOVEMENT. COMES WITH WATER PUMP GASKETS, CAST IRON HOUSING. Learn More -
DSL-4 NO-WELD/NO-DRILL DRIVESHAFT LOOP, ALL GM W/ TURBO 200 overdrive transmission
$89.00PROTECT YOUR MUSCLECAR FROM CATASTROPHIC DRIVESHAFT LOSS WITH EASY TO INSTALL DRIVESHAFT LOOP FOR ALL GM A,B,F,G BODY WITH TURBO-200 SORT OR MED TAILHOUSING.TOUGH BLACK POWDERCOAT FINISH. Learn More
-
DSL-2 No Weld / No Drill driveshaft loop--Turbo 350 & 4 speed& tremec vehicles
$109.00Protect your musclecar from damage resulting from broken U-joint or broken trans yoke. This is an easy addition with no welding or drilling...bolt to trans mount and fits in your trans tunnel. Some tunnels are tight fit and require bending the stem of loop and/or applying rubber to floor pan to prevent contact. Fits all GM A, B, F & G bodies(ie. Chevelle/GTO/442, Catalina/Caprice, FB/Camaro, GrandPrix/MonteCarloTough black powdercoated finish. Learn More
-
DSL-3 No Weld / No Drill driveshaft loop--Powerglide and Turbo 700R4 & 4LE transmissions
$109.00Protect your musclecar from damage resulting from broken U-joint or broken trans yoke. This is an easy addition with no welding or drilling...bolt to trans mount and fits in your trans tunnel. Some tunnels are tight fit and may require redrilling for best fit. Fits all GM A, B, F & G bodies(ie. Chevelle/GTO/442, Catalina/Caprice, FB/Camaro, GrandPrix/MonteCarloTough black powdercoated finish Learn More