Pontiac

Ultimate exhaust for 67-69 Firebird Convertible with our X-crossover which fits above the X-brace. No need to lower the brace and give up valuable strength & ground clearance. Includes downpipes for Long Branch factory headers and ball&cone connections that install in the front of each muffler so the system can easily be removed and reinstalled. Mandrel bent tails go all the way to the rear. If you want tails that turn-down behind rear tire state your preference in order comments. All American made Lifetime warranty. Comes with easy to use rod hangers, clamps and instructions. Welding is recommended.

Mufflers that fit in this system are listed below. Best fit are the 3334F Spin Tech as it is only 3" tall which maximizes ground clearance. Other muffler options are 4" tall. Learn More

This kit gives you everything you need ahead of the mufflers.

Kit includes:
Short mandrel bent headpipes
Flanges
X-over Kit
Ball & Cone adapters
Fit/install instructions

Available in 2.5" or 3.0". The Ball & Cone adapters are a great feature which allow easy installation and removal making access for maintenance a cinch. It also allows you to remove from your car after welding for any custom coating or painting. Only the superior quality RARE crossover components are provided in our kits. Learn More

PAIR, ADJUSTABLE UPPER CONTROL ARMS ALLOW FOR EASY PINION ANGLE/SUSPENSION TUNING WITHOUT REMOVING THE CONTROL ARMS. FEATURE HARDENED 4130 ROD ENDS. BLACK POWDERCOAT. Learn More

PAIR, FRAME REINFORCEMENT ARMS--These brace the over-the-axle crossmember to the main frame. These connect at the control arm front bolt locations and strengthen the frame at its weakest area in GM A, B and G bodies. They are a bolt-on! High strength alloy tubular construction. Black powdercoat finish. Learn More

Flowkooler water pump fits all engines with 64 or later timing cover. All new components...not a rebuilt-used- pump housing 8-bolt type stock offset on pump flange keeps correct pulley alignment. Hi flow impeller makes this pump the most efficient available! Comes with gasket required for install. Click on picture for impeller view. Learn More

POLISHED TO BRIGHT REFLECTIVE FINISH WITH CLEAR-CERAMIC COATING...Aluminum Flowkooler water pump fits all engines with 69 or later timing cover. 11-bolt type stock offset on pump flange for correct pulley alignment. Hi flow impeller makes this pump the most efficient available! 4.5" length Comes with 2 gaskets required for install (one behind pump & one behind your plate). Click on picture for impeller view. Learn More

PAIR, JIG FITTED, HIGH STRENGTH TUBULAR UPPER CONTROL ARMS WITH GENUINE ENERGY-SUSPENSION BUSHINGS. FITS A-BODY: GTO/LM, CHEVELLE, 442/CUTLASS, GS/SKYLARK & B-BODY: CATALINA/BONNE, IMPALA/BELAIR, GRANDPRIX(EXC.69-70), FOR YEARS NOTED. BLACK POWDERCOAT FINISH. Learn More

PAIR, FRAME REINFORCEMENT ARMS--These brace the over-the-axle crossmember to the main frame. These connect at the control arm front bolt locations and strengthen the frame at its weakest area in GM A, B and G bodies. They are a bolt-on! High strength alloy tubular construction. Black powdercoat finish. Learn More

PAIR, ADJUSTABLE UPPER CONTROL ARMS ALLOW FOR EASY PINION ANGLE/SUSPENSION TUNING WITHOUT REMOVING THE CONTROL ARMS. FEATURE HARDENED 4130 ROD ENDS. BLACK POWDERCOAT. Learn More